CONTACT US | (03) 8786 3335 | info@vibroflow.com.au

Case Study

Clinker Feeders

13/02/2014

Case Parameters

General Properties
Equipment Type: Feeder
Industry: Quarry / Mineral Processing
Physical Properties
Unit Length: 2000 mm
Unit Width: 942 mm
Unit Height: 1502 mm
Unit Weight: 1100 kg
Application
Capacity: 150 tph
Product Cement
Design
Drive Type: Sub Resonant
Liner Type CC 1500
Support Type Steel Coil Spring
Trough Construction Mild Steel
Cover Type Bolted
Motor Quantity 2
Support Location Top

Application

Due to space restrictions in a local cement plant, Vibroflow had to custom design two vibratory feeders that would allow the client to precicely feed clinker onto a belt conveyor.

Solution

Due to the fine feed rate control required, the best drive system was sub resonant. With the addition of a counter mass, this made fitting difficult. A redesigned 'concentrated' drive was installed to make the unit fit into the required space envelope.

The use of heavy CC1500 wear liners also limited the drive choices to sub resonant.

These units are compact and dust tight with rubber seals on the inlet and discharge. The trough also incorporates removable covers.

Both feeders are suspended via ropes and steel coil isolating springs.

Two 0.35kw motors excite these feeders to achieve a feed rate of 150tph of clinker cement.

Contact us for more information

Related Cases

Please choose a related case below. To check out all our cases click here.

Prill Tower Feeder

An ammonium nitrate feeder that is designed to take a 3 tonne load from a 20 meter drop.

Ore Hopper Feeder

Sample station bisalloy lined hopper feeder for iron ore research.

Pre Dryer Feeder

Direct drive feeder that receives ammonium nitrate from one dryer and conveys it into another.

© 2015 | Vibroflow | Australian Engineered and Build Vibratory Equipment

ABN: 67 101 574 476