CONTACT US | (03) 8786 3335 |

Case Study

Long Sealed Chemical Conveyor


Case Parameters

General Properties
Equipment Type: Conveyor
Industry: Chemical / Fertiliser / Salt
Physical Properties
Unit Length: 8896 mm
Unit Width: 986 mm
Unit Height: 1317 mm
Unit Weight: 3900 kg
Capacity: 5 tph
Product Cyanide
Drive Type: Sub Resonant
Liner Type
Support Type Oscillating Mount
Trough Construction Stainless Steel
Cover Type Sealed Windows
Motor Quantity 2
Support Location Bottom


Product is loaded from five different points along a straight line and needs to be collected and discharged to one point.

All interfacing points need to be 100% sealed.

Material has a tendency to overload and as a result; overflow.


A sub resonant tuned vibratory conveyor with four inlet points, seven inspection windows and ten spray points was designed for this application.

The trough was fabricated from pressed sections and a laser cut lid which was tig welded and sealed.

The unit is mounted on oscillating mounts to minimise vibration transmitted to the floor during start-up and stopping.

Contact us for more information

Related Cases

Please choose a related case below. To check out all our cases click here.

Diamond Conveyors

Replacement of a single 13m diamond slurry conveyor with two shorter units due to installation restrictions.

Vibratory Nut Conveyor

A food grade nut conveyor designed to receive product from a heater and feed into a bucket elevator.

Long Sealed Chemical Conveyor

Fully sealed long vibratory conveyor with inspection windows.

© 2015 | Vibroflow | 1/40 Green St, Doveton VIC 3177 | (03) 8786 3335 | Australian Engineered and Build Vibratory Equipment | Articles

ABN: 67 101 574 476