CONTACT US | (03) 8786 3335 | info@vibroflow.com.au

Case Study

Vibratory Spiral Conveyor

20/08/2012

Case Parameters

General Properties
Equipment Type: Spiral Elevator
Industry: Recycling
Physical Properties
Unit Length: 1130 mm
Unit Width: 1130 mm
Unit Height: 1710 mm
Unit Weight: 400 kg
Application
Capacity: .25 tph
Product Rubber
Design
Drive Type: Direct Drive
Liner Type
Support Type Steel Coil Spring
Trough Construction Mild Steel
Cover Type
Motor Quantity 2
Support Location Bottom

Application

A portable pilot plant that recycled tyres needed cooling equipment that would reduce the temperature of shredded rubber from 100 degrees to 50 degrees. Horizontal space was limited as the whole plant had to fit within a container size area.

Solution

A spiral elevator was offered that has a small footprint but large cooling area. This unit would receive material in it's bottom pan and elevate approximately a meter high and then discharge via chute for further processing.

Usually holes are drilled in the center tube to allow air to be passed over the material however this wasn't necessary due to the small capacity requirements in this application.

Contact us for more information

Related Cases

Please choose a related case below. To check out all our cases click here.

Recycling Spiral Elevator

Glass waste spiral elevator lifts material 4.5m high in a recycling facility.

Vibratory Spiral Conveyor

Vibratory spiral elevator designed to elevate and cool shredded rubber in a recycling pilot plant.

Foundry Spiral Conveyor

Standard vibratory spiral elevator for use in foundry sand reclamation systems.

© 2015 | Vibroflow | Australian Engineered and Build Vibratory Equipment

ABN: 67 101 574 476