You are currently viewing Salt Screen
Feed end.

Salt Screen

Application

Salt particles larger than 3mm in size were causing problems down stream. The client required a compact scalping solution that would fit between existing equipment without issue.

Dust control and screen blinding were issues that needed to be addressed.

Solution

To address the dust issue, a bolted cover with a tube was located at the inlet point to allow material in. A second quick release cover with dust exhaust was installed over the discharge to allow for fast inspection and cleaning of the screen deck.

Due to the corrosive nature of salt, 316 stainless steel was used for the trough body.

The screening mesh was chosen to be a 3mm perforated plate based on the clients past success with such a media.

Stainless steel salt vibrating screen side.
Stainless steel salt vibrating screen side.
Feed end.
Feed end.
Vibroflow Reference J205
Industry Chemical / Fertiliser / Salt
Product Salt
Equipment Type Vibrating Screen
Drive Direct Drive
Liner
Support Steel Coil Spring
Construction Stainless Steel
Motor Qty 2
Length (mm) 951
Width (mm) 760
Height (mm) 645
Capacity (tph) 0.4