Australian Made Vibrating Screens and Vibrating Feeders

CnD Finger Screen

Application

A company that specialises in the demolition of industrial and commercial buildings wanted a solution to reduce the costs associated with waste disposal. It was determined that the savings from disposing sorted product was worth the investment in a vibratory screen.

This client wanted an all in one solution that would remove all fines from plastic, plaster, timber, steel, brick, concrete and screed.

Product was to be fed via a 4 ton excavator with a capacity of 0.5m3

Expected capacity was 120tph of product

Solution

Vibroflow offered a two stage vibratory finger screen. The first deck was a finer screen with 10mm aperture. The second deck included a larger 40mm aperture. In between was a series of fingers which were designed to rotate material so that any stuck fines will fall off.

Two undersize discharge chutes were located on the side of the unit. All oversize was discharged over the end.

Due to the abrasiveness of CnD waste, all surfaces in contact with material were lined with Bisalloy.

A hopper style extension was included in the feed deck to allow for the excavator arm and 0.5m3 worth of product.

The client wasn’t sure of how difficult their material would be to screen so requested a sub resonant drive system which would allow to fine tune the vibration levels for each product batch via VSD.

Inside waste vibrating screen.
Inside waste vibrating screen.
C&D waste vibrating screen side.
C&D waste vibrating screen side.
Side view of the vibrating c&d waste screen.
Side View
Finiger decks on C&D waste vibrating screen.
Finiger decks on C&D waste vibrating screen.
Vibroflow Reference J213
Industry Recycling
Product Construction and Demolition Waste
Equipment Type Vibrating Screen
Drive Sub Resonant
Liner Bisalloy
Support Steel Coil Spring
Construction Mild Steel
Motor Qty 1
Length (mm) 4584
Width (mm) 1706
Height (mm) 2898
Capacity (tph) 120
Close Menu