CONTACT US | (03) 8786 3335 |

Case Study

Hanging Chemical Conveyors


Case Parameters

General Properties
Equipment Type: Conveyor
Industry: Chemical / Fertiliser / Salt
Physical Properties
Unit Length: 2700 mm
Unit Width: 600 mm
Unit Height: 1030 mm
Unit Weight: 1300 kg
Capacity: 3.4 tph
Product Cyanide
Drive Type: Sub Resonant
Liner Type
Support Type Steel Coil Spring
Trough Construction Stainless Steel
Cover Type Sealed Windows
Motor Quantity 1
Support Location Top


Product from two output chutes needed to be mixed and discharged at a single location.

Vertical space was limited so a compact design was required.

The floor is cleaned often and the equipment should provide a minimal footprint.


Two twin mass vibratory conveyors were designed to fit in this envelope. Due to space restrictions, both units are of a slightly different design but are very similar.

A hanger system is installed to suspend these units to an overhead frame. This allows free and easy cleaning of the floor underneath.

One unit is elevated slightly relative to the other with material passing through both conveyors.

The trough is made in a similar fashion to the long sealed conveyor and sealed chemical screen

Inspection windows and water spray points are integrated into the trough structure.

Contact us for more information

Related Cases

Please choose a related case below. To check out all our cases click here.

Diamond Conveyors

Replacement of a single 13m diamond slurry conveyor with two shorter units due to installation restrictions.

Vibratory Nut Conveyor

A food grade nut conveyor designed to receive product from a heater and feed into a bucket elevator.

Vibratory Water Separator

Vibratory water separator for the removal of light particles from glass waste.

© 2015 | Vibroflow | Australian Engineered and Build Vibratory Equipment | Articles

ABN: 67 101 574 476